Barbed Pex Pipe Insert, Chrome, 1/2 X 1/4 In. Od

barbed pex pipe insert, chrome, 1/2 x 1/4 in. od - Description

SharkBite 1/2" Chrome Plated Barb Insertx1/4" OD Lead-Free Needle Valve Drain Valve. This valve is used with TV# 608933 Cinch Clamps and requires Cinch Tool TV# 608743 or Copper Crimp Rings on Cross Link Polyethylene Pex Tubing. It has NSF listed brass inserts, ASTM F-876, ASTM F-877 to SDR-9 dimensional standards, NSF 14 & 61 for use in potable water systems, CSA B137.5 standards, NSF CL-R certified for use in hot water systems where chlorinated 140 degrees Fahrenheit hot water can be constantly re-circulated. The wetted surface of this product contacted by consumable water contains less than 1/4 of 1 percent, 0.25%, of lead by weight. It meets AB1953 California & VT S152 Vermont low lead restrictions.

• 1/2 in. Chrome Plated Barb Insert x 1/4 in. OD
• Used with TV# 608933 Cinch Clamps, Need Cinch Tool TV# 608743 Or Copper Crimp Rings On Cross Link Polyethylene Pex Tubing.
• After crimping you can test each fitting to well over 100 PSI.
• NSF Listed Brass Inserts, ASTM F-876, ASTM F-877 To SDR-9 Dimensional Standards, NSF 14 & 61 For Use In Potable Water Systems, CSA B137.5 Standards, NSF CL-R Certified For Use In Hot Water Systems Where Chlorinated 140 Degrees Fahrenheit Hot Water Can Be
• The wetted surface of this product contacted by consumable water contains less than 1/4 of 1 percent, 0.25%, of lead by weight.
• Meets AB1953 California & VT S152 Vermont Low Lead Restrictions.